• ICE MBR Membrane Module of Industrial Wastewater Treatment for Cooling Tower System

    ICE MBR Membrane Module of Industrial Wastewater Treatment for Cooling Tower System

    Membrane Bioreactor (MBR) is a kind of advanced technology developed since the end of 20th century which realized the efficient combination of membrane separation technology with biological technology. The membrane separation technology replaces the traditional active sludge method and the normal filter unit; its strong separation ability can make the SS turbidity near to be zero. Hydraulic retention time (HRT) sludge age (SRT) is completely separated; the outlet water is in good and stable quality which will be reused without the third level treatment. Own to the economic and effective water with high security, the application scope of wastewater recycling been widely expanded. 

  • Counter-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    Counter-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    The cooled dry air enters through the louvers on each sides of the tower in the bottom, and drawn upwards and over the coils by the force from the axial fan which installed on the top, agitating the falling water (came from the water distribution system) and increasing the transfer efficiency of heat in a state of hot wet air discharged out of the tower into the atmosphere. During this working process, a small amount of the re-circulating water evaporates due to latent heat transfer through the tube and walls of the coils, removing heat from the system. In this mode of operation, due to the evaporative performance lower the leaving water temperatures and the fan energy been saved.

  • Cross-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    Cross-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    As induced draft type cross flow evaporative cooling tower, the tower fluid (water, oil or propylene glycol) is used to provide cooling which is enclosed in a coil and is not exposed directly to the air. The coil serves to isolate the process fluid from the outside air, keeping it clean and contaminate free in a closed loop. Outside of the coil, there is water spraying over the coil and mixes with the outside air to discharge warm air from the cooling tower to the atmosphere as a portion of the water evaporates. Cold water outside of the coil is re-circulated and reused: the cool water loops back to the beginning of the process to absorb more heat during evaporating. It helps maintain a clean process fluid which will reduce the maintenance and operation costs. 

  • Induced Draft Cooling Towers with Rectangular Appearance

    Induced Draft Cooling Towers with Rectangular Appearance

    The open circuit cooling towers are devices which make use of a natural principle: a minimum quantity of water dissipates the heat by the forced evaporation to cool down the relevant equipments.

  • Round Bottle Type Counter-flow Cooling Towers

    Round Bottle Type Counter-flow Cooling Towers

    An open circuit cooling tower is a heat exchanger, which enables water to be cooled through direct contact with air.

    The heat transfer from the water to the air is carried out partly by sensible heat transfer, but mainly by latent heat transfer (evaporation of part of the water into the air), which makes it possible to reach cooling temperatures lower than ambient temperatures.

  • Induced Draft Cross-flow Towers for Power Generation, Large-scale HVAC and Industrial Facilities

    Induced Draft Cross-flow Towers for Power Generation, Large-scale HVAC and Industrial Facilities

    This series cooling towers are induced draft, cross-flow towers and tailored according to customer’s requirements on performance, structure, drift, power consumption, pump head and target cost.

  • ICE Chemical Dosing System for Water Treatment in Cooling Tower System

    ICE Chemical Dosing System for Water Treatment in Cooling Tower System

    The cooling system operation directly affects reliability, efficiency, and cost of any industrial, institutional, or power industry process. Monitoring and maintaining control of corrosion, deposition, microbial growth, and system operation is essential to provide the optimize Total Cost of Operation. The first step to achieve minimum it is selecting an appropriate treatment program and operating conditions to minimize system stresses.

  • ICE Industrial Water Softener System for Cooling Tower Source Water

    ICE Industrial Water Softener System for Cooling Tower Source Water

    Water softening is a water purification process that uses ion exchange technology to remove naturally occurring minerals such as calcium and magnesium from water to prevent buildup in pipes and appliances. The process is used often in commercial and industrial settings to facilitate ease-of-use and extend the lifetime of water-handling equipment.

  • ICE High Efficiency Sand Filtration System for Cooling Towers’ Circulation Water Treatment

    ICE High Efficiency Sand Filtration System for Cooling Towers’ Circulation Water Treatment

    Particles responsible for fouling of heat transfer surfaces are smaller than 5 microns. ICE high efficiency cooling tower water filters remove these extremely fine particles to provide the true benefits of clean cooling water.

  • ICE Industrial Reverse Osmosis System for Cooling Tower Water System

    ICE Industrial Reverse Osmosis System for Cooling Tower Water System

    Reverse Osmosis / RO is a technology used to remove dissolved solids and impurities from water using a semi-permeable RO membrane which allows the passage of water but leaves the majority of dissolved solids and other contaminants behind. The RO membranes require water to be under high pressure (greater than osmotic pressure) to do this

  • High-efficiency Evaporative Condenser for Industrial Refrigeration / Cold Chain Process / HAVC System
  • Cheap Water Cold Counter Flow Closed Loop Cooling Tower

    Cheap Water Cold Counter Flow Closed Loop Cooling Tower

    Product core introduction Experience reduced water consumption with ICE closed circuit coolers; designed utilizing ICE finned coil technology. Easier to maintain than open-system cooling towers, ICE closed circuit coolers are an excellent option for any cooling system. Highly versatile, the coolers have a variety of applications, from cooling industrial process equipment to maintaining temperatures in data centers and computer rooms to chemical manufacturing and everything in between. Princ...
12 Next > >> Page 1 / 2