Closed Cooling Tower

Our target is always to satisfy our customers by offering golden support, superior value and high quality for Closed Cooling Tower, Evaporative Condenser HVAC, Industrial water treatment RO equipment, Edi Equipment, Our goal is "blazing new ground, Passing Value", in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly! Our goods are commonly recognized and reliable by consumers and may satisfy continually developing economic and social needs for Closed Cooling Tower, Based on products with high quality, competitive price, and our full range service, we have accumulated professional strength and experience, and we have built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality products and passionate service. Let's open a new chapter of mutual benefit and double win.


  • Counter-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    Counter-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    The cooled dry air enters through the louvers on each sides of the tower in the bottom, and drawn upwards and over the coils by the force from the axial fan which installed on the top, agitating the falling water (came from the water distribution system) and increasing the transfer efficiency of heat in a state of hot wet air discharged out of the tower into the atmosphere. During this working process, a small amount of the re-circulating water evaporates due to latent heat transfer through the tube and walls of the coils, removing heat from the system. In this mode of operation, due to the evaporative performance lower the leaving water temperatures and the fan energy been saved.

  • Cross-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    Cross-flow Closed Circuit Cooling Towers / Evaporative Closed-circuit Coolers

    As induced draft type cross flow evaporative cooling tower, the tower fluid (water, oil or propylene glycol) is used to provide cooling which is enclosed in a coil and is not exposed directly to the air. The coil serves to isolate the process fluid from the outside air, keeping it clean and contaminate free in a closed loop. Outside of the coil, there is water spraying over the coil and mixes with the outside air to discharge warm air from the cooling tower to the atmosphere as a portion of the water evaporates. Cold water outside of the coil is re-circulated and reused: the cool water loops back to the beginning of the process to absorb more heat during evaporating. It helps maintain a clean process fluid which will reduce the maintenance and operation costs.